Electrical Connections & Load Test: See How It's Done!
📝 Description
Discount Coupon code ($50 off $500): SAVE50TGBATG Join us as we explore the essential connections and load testing procedures for our electrical setup! From battery lugs with 2-aught cables to the standard Ethernet VE bus connection and 6 gauge Romex wiring, we cover it all. Discover how power flows through the load center in this detailed overview! #ElectricalSetup #LoadTesting #ConnectionsGuide #BatteryLugs #VEBus #EthernetCable #RomexWiring #LoadCenter #PowerConnections #DIYElectrical
batterydiy
🎬 Related Videos
📝 Video Transcript
So, let's talk about some of the connections we have going on here real quick. And we have just a basic connection so that you can we can kind of demo and do a little bit of a load test on here. Right. So, the uh obviously right here you have two two cables connected to the battery lugs here.
The red cables are two two cables also. They're positive. So, they're connected right there. This white cable here is the VE bus connection and it's a standard Ethernet cable.
There is nothing special. No special pin outs or anything like that. Standard Ethernet cable that connects to one of the ports. any one of the ports.
There's two here uh that connects to one of that and it connects down here to the Serbo GX down there. And here we have uh I believe it's six uh six gauge ROMX here. The black is hot and the white is neutral. And then you got this ground wire here that comes out obviously back through here into this load center right here.
and his load center.