Battery Capacity Test | WattCycle 48V 100ah #energystorage #offgrid #lifepo4 #battery #wattcycle
📝 Description
📝 Video Transcript
All right, you guys. So, what we got going up in here is we got the capacity test going on with this Watts Cycle wall-mounted battery. We got a Frankenstein setup going up in here. So, don't do this.
This is only for temporary testing purposes. We got it connected to the negative coming off the battery connected to this Victron Smart Shunt, which this Victron Smart Shunt and the battery is connected to this Victron inverter, MultiPlus II inverter, and then it's connected to a dehumidifier / AC going on over there. At the current rate that it's running, it's pulling about 7 amps as you can see right there, 7. 1 amps.
It's going to be measured by this, and we're going to do the capacity test. So, hopefully this battery, which is rated for 100 amp hours, it will pull the full 100 amp hours. We're going to have to wait and find out. At the rate that it's going, we're going to have to let it go overnight.
Hopefully, check back in the morning and see if we can catch it before it runs out. But, that thing is what's really measuring this. So, check back soon.